Sale

Kimya PEKK Carbon Grey | 2.85mm | 500g

Sale

Original price was: £463.94.Current price is: £440.74. (excl. VAT)

The Kimya PEKK Carbon 3D filament belongs to the polyaryletherketone family. Polyetherketoneketone (PEKK) is a thermoplastic polymer reinforced with carbon fibre. This combination gives it a high level of rigidity and heat-resistance.

Please scroll down to see full product details 👇

Original price was: £463.94.Current price is: £440.74. (excl. VAT)

Buy Now

Add to cart

Product details

It can be used as a material in components exposed to acids and hydrocarbons, such as fuel and lubricants, and also to produce components located in engine housings. The Kimya PEKK Carbon 3D filament has the following properties:

Temperature resistance
Reinforced with carbon fibre
Complies with the REACH standard

Print Parameters and Specimens Dimensions

PRINTING DIRECTION	XY
Printing Speed	20-40 mm/s
Infill	100% – rectilinear
Infill Angle	45°/-45°
Nozzle Temperature	350-390°C
Bed T°	110-150°C

Filament Properties

PROPERTIES	TEST METHODS	VALUES
Diameter	INS-6712	1.75 ± 0.1 mm 2.85 ± 0.1 mm
Density	ISO 1183-1	1.27 g/cm3
Moisture rate	INS-6711	< 1 %
Glass transition temperature (Tg)	ISO 11357-1 DSC (10°C/min – 20-410°C)	160 °C

Printed Specimens Properties

PROPERTIES	TEST METHODS	VALUES
THERMAL PROPERTIES	Maximum use T°	–	150 °C
ELECTRICAL PROPERTIES	Dielectric strength	IEC 60243-1 (100µm)	84 KV/mm
ELECTRICAL PROPERTIES	Surface resistivity	ASTM D257	10¹⁶ Ohms/m²
MECHANICAL PROPERTIES	Tensile modulus	ISO 527	2,900 MPa
	Tensile Strength	ISO 527	39.1 MPa
	Tensile strain at break	ISO 527	3 %
	Flexural modulus	ISO 178	2,924 MPa
	Flexural strength*	ISO 178	85.9 %
	Charpy impact resistance	ISO 179-1/1eA	5 kJ/m²

Note 1	*According to ISO 178, end of the test at 5% deformation even if there is no specimen break.
Note 2	The data should be considered as indicative values – Properties can be influenced by production conditions.