Loctite 3D Resin Cleaner C – 18KG

LOCTITE 3D Printing Cleaner C is a non-combustible cleaning agent at room temperature, boasting a flashpoint of 75°C. It’s specifically designed for the post-processing of SLA/DLP printed components.

It’s a challenge to clean excess resin on small details of SLA/DLP parts. For details as small as 1mm to 40mm diameter, deep tubes or complex structural parts can be cleaned with Cleaner C.

• Non-flammable at ambient temperatures
• Non-harmful
• Efficiently cleans intricate parts, including lattice structures.
• Cleans most resins in 5-10 minutes
• Can be easily rinsed with water.
• Ensures the integrity of both ‘green’ and cured parts when used as directed.

Brochure

Technical Data Sheet

Cleaning Performance – IPA vs Cleaner C
Following each cleaning cycle, the amount of resin dissolved in the bath grows. After numerous cycles, the resin dispersed in the cleaning solvent may leave a sticky residue on the printed parts. Parts cleaned with IPA show structural alterations when the resin concentration in the bath exceeds 10%. In contrast, those cleaned with Cleaner C maintain their quality even with resin concentrations above 15% in the bath. Cleaner C offers extended wash cycles compared to IPA.