MAKERBOT True Gray ABS

True Gray – MakerBot ABS Filament is the best, most consistent, and most tested ABS filament for MakerBot Replicator 2X 3D printers. The filament is good for detailed prints and can be used in conjunction with MakerBot Dissolvable Filament.

Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2X to verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of printing. Every filament color undergoes long duration testing to ensure that there are no deviances in print quality. Every millimeter of MakerBot filament has been subjected to stringent laser testing. Consistently round diameter – ensures highest print quality and consistent flow through the extruder nozzle. MakerBot ABS Filament adheres well to kapton tape on heated build plate.

MakerBot ABS Filament requires a heated build platform. Also, ensure your build plate is level, clean and oil-free. Use MakerBot ABS Filament in a well-ventilated area.

Dimensions & Weights

Spool Diameter: 20.32 cm
Spool Width: 7.62 cm
Spool Hub Hole: 5.08 cm
Filament Fiameter: 1.75 mm
Shipping Weight: 1.36 kg
Net Weight: 1kg

Temperatures

Glass Temp: 105° C (221° F)
Melting Temp: Amorphous, no ‘true’ melting point
Nozzle Temp: 230° C (446° F)